- Name
- Pressure transducer module
- Pressure measuring range
- 0...10 bar
- pressure measuring variant
- relative pressure
- Remainiing error linearity/hysteresis
- < 0,3% FS
- Application temperature
- -20...+80 °C
- Raw material
- Sensor: Ceramic AI203, Housing: Aluminium
- Pressure connection
- Hose connection 6/4 mm
- Output signal
- Analogue: 0...5 VDC, digital: I²C
- Electrical connection
- 5-pole pin header, RM 2,54 mm
- Power supply
- 6...15 VDC
- Dimensions
- (LxWxH) 30x30x51 mm
- Weight
- 0.0526 kg
The pressure transducer modules of the DRMOD-I2C series transfer the measuring value as a calibrated and temperature compensated I²C digital signal. A second analogue output provides the measured values as linearised signal 0…5 VDC. A Microcontroller or Pressure controller can then directly read the pressure values via a 5-pin board connector.
The probe housing is made out of light metal (aluminium). The connection to the medium takes place over a hose connector 4/6. These transsucers show a high chemical resistance, however we recommend to make a media compatibility test especially if critical media like e.g. in electroplating applications (iron trichloride) or oils with undefined additives are used.
Areas of application:
- Food industry
- Building automation
- Aeration systems
- Fuel pumps
- Fill level controls
- Fuel cells,…
Note:
Programming of customer-specific I²C address with article SHOP 0800 3000.
Deutsch
English