Digital humidity and temperature probe for Hytelog Multisensor, HYT 271-S

Product no.: SHOP 0636 0011M

Highly precise probe for the combined humidity and temperature measurement, encapsulated in robust stainless steel housing and sinter filter. The RJ12 allows a very easy use with our HYTELOG Multisensor interface.

Weight: 0.1338 kg
Article name
Digital humidity and temperature probe
measurement category
humidity and temperature
Sensor
Digital humidity and temperature sensor HYT271-S
Humidity measuring range
0...100% RH
Humidity accuracy
±2% RH at 23 °C
Temperature measuring range
-40...+125 °C
Accuracy
±0.2 °C (at 0...60 °C)
Resolution
14 Bit
I²C address
0x28, 0x29 or 0x2A
Tube length incl. filter
150 mm
Tube diameter
12 mm
Tube material
Stainless steel 1.4571
Protective filter
Stainless steel 1.4404, pore size 45 µm, Ø 12 x 20mm
Cable
AWG28, PVC insulated, AD 5.0 mm
Cable length
3000 mm
Connection
RJ12-connection plug
Operating voltage
2.7...5.5 V DC
Protection category
IP65 (except thermocouple connector and sintered filter)
Current consumption
typ. <22 µA bt 1 Hz measuring rate, 850 µA maximal
Output signal
Digital, I²C
Features
For use with the HYTELOG Multisensor measuring system
Weight
0.1338 kg

The innovative humidity and temperature probe uses a I²C-interface communication protocol. The probe is calibrated ex factory to a high measurement accuracy both for temperature (±0,2 °C) and humidity (±0,18 %RH) and an extensive temperature range up to 125 °C.

The humidity and temperature probe is ebcapsulated in a high quality stainless steel housing using a stainless steel sinter filter with pore size about 45 µm. the filter protects the sensors from mechanical damages and dirt and at the same time allows a relative rapid air circulation between the ambient air and the measurement chamber (good response time). The RJ12 Connector enables an easy and fast connection to our HYTELOG Multisensor interface. The digital I²C output signal can also be prcessed via a microcontroller (µC). The probe has standardly an I²C bus address 0x28. This can be changed with a µC or with the B+B I2C-USB interface adapter.

With the Hytelog humidity and temperature measuring system you have the option of connecting 3 sensors at the same time. The temperature or humidity sensors can be easily connected via the three RJ12 sockets. It only has to be considered that the sensors have different I²C addresses. When used with the Hytelog multisensor, only the addresses 0x28,0x29 and 0x2A are permitted.

Cable lengths of 10, 15, and 20 m are available under request.

Areas of application:

  • Building technology
  • Industrial measurement and control technology
  • Climate monitoring and use in drying processores such as tea or tobacco

I²C interface

Communication corresponds to the usual I²C protocol. All technical specifications of the protocol can be found in the documentation "Serial" Interface of B + B. Log in conveniently in our download center and select "I²C communication ASIC": Download page .

Note:

Programming of customer-specific I²C address with article SHOP 0800 3000.


No review available for this product.

The quality of our targets reflects the quality of our future! As a certificated company B+B can grant top quality products.

B+B offers you an innovative and a wide range of products for several applications in the temperature, humidity and pressure measurement.

Payment without any risks. Trusted Shop certificated online shop with buyer protection.

An excellent warehouse system grants a short-time delivery of standard products.