- Article name
- Infrared camera
- Temperature measuring range
- -20...+900 °C
- Detector
- FPA, uncooled (17 μm x 17 μm)
- Optical resolution
- 382 x 288 pixels
- Environmental temperature
- 0...+50 °C
- Storage temperature
- -40...+70 °C
- Allowable relative humidity
- 10...95% RH (non-condensing)
- Spectral range
- 8...14 µm
- Power supply
- 5V DC (supply via USB interface)
- Process Interface
- 0...10 V input, 0...10 V output, digital input
- cable length
- 1 m
- Software
- PIX Connect
- Dimensions
- (LxWxH) 46 x 56 x 68-77 mm (depending on lens and focus position)
- Protection category
- IP67
- Scope of delivery
- USB camera with lens, USB cable, table stand, PIF cable with terminal block, carrying case, software
The ThermoCam 400 is a high-resolution thermal imaging camera. It is equipped with a two-dimensional thermal sensor with 382 x 288 pixels. The FPA (Focal Plane Array) sensor has a thermal sensitivity of 75 mK, which enables this compact thermal imaging camera to detect the smallest temperature differences on a surface.
With the frame update speed of up to 80 images per second, the ThermoCam PI 400 is also suitable to monitor relatively fast processes. In particular, it is used to monitor processes in the automotive, plastics processing as well as in the semiconductor and photovoltaic industries and to ensure the quality of the products manufactured here.
The IR camera has a temperature range of -20 °C to 900 ° C. The thermal imaging camera is available with four alternative (interchangeable) lenses for near and far field monitoring. The "PI Connect" software provides video and snapshot recordings, as well as extensive offline and online analyzes.
Features:
- Very good thermal sensitivity
- Thermal images in real time (up to 80Hz frame rate)
- Optional interchangeable lenses for near and far field Thermo photography
- Detector resolution with 382 x 288 pixels
- Analog output and digital Ios for process automation
- Free extensive analysis and monitoring software
Application examples:
- Electronics development
- Process control during extrusion
- Development of electronic components
- Development of mechanical components
- Process control during calendering
- Process control in solar cell production
- Injection molding temperature measurement
Further cameras and lenses are possible on request.
Deutsch
English